Search

Medtronic was made aware of a supplier calibration issue during the contract sterilization process that may lead to unsterile product. Recall start date: March 1, 2023

Olympus has received complaints that the clip did not come out of the tube sheath during the procedure. investigation by Olympus confirmed the tube sheath is longer than specifications which prevents the clip from being extended. Absence of treatment,…

Maquet Cardiopulmonary GmbH determined two trends for complaints regarding the Heater Cooler Unit HCU 40: degraded internal drain hoses and leaking vacuum valves. This recall will inform users, and give instructions to replace affected parts during next…

Thermo scientific™ Hp StaR™ lateral flow kits are failing to meet IFU criteria with multiple strip giving false positive results with known negative samples and also false positive result on substrate diluent. Recall start date: March 10, 2023

While conducting safety disk testing, expired tubing was used on the test fixture equipment between April 01, 2022 and July 31, 2022. when using the obsoleted, and expired catheter extender tube, 0004-00-0033-01 during the static inflate/deflate test…

Radiometer has become aware that there is a problem relating to the Aqure System (stand alone software system) used in combination with the third party device Lumiradx that may result in patient mix-up. Currently there are no customers in Canada using…

During investigational testing of the Habib™ Catheter with the ERBE VIO 3 generator (compatible 3rd party device), an issue with the generator setting in the Habib™ IFU (50738103) was identified. From the results of this testing, it was…

During a specific servicing activity, if the wrong screws are removed by the service personnel without the appropriate table supports in place, there is the potential for the table to drop. Recall start date: June 6, 2022…

This recall is being initiated to notify customers that BD has identified internally through a product review that the BD Bodyguard™ Microsets do not currently have the evidence to support compliance with ethylene oxide (eo) residual level requirements (…

The recall is being done because the device does not meet the requirements of the MDR. Specifically, the devices implanted are not on the device system's active license 104252. Recall start date: March 1, 2023

Zimmer Biomet is conducting a medical device correction to update the compatibility matrix as referred to in the instructions for use (IFU) for the CoCr Femoral Head XS. The update is to remove the compatibility with the Epsilon Durasul Constrained …

During the investigation of a customer complaint it was determined that multiple lots of cables were not assembled with enough epoxy on the proximal end, creating light output issues. Recall start date: February 28, 2023

Since the end of November 2022, Nidek has received reports from EU countries about elevated intraocular pressure after implantation of Eyecee One Preloaded and Eyecee One Crystal Preloaded. Concerned about the possibility of a similar trend occurring in…

BD has received complaints regarding mismatch between the coaxial and the needle in mission kit devices, where the external diameter of the biopsy instrument being larger than the internal diameter of the coaxial needle. Recall start date: February 28…

Laborie became aware of the damaged packaging through the complaint process. A complaint case was issued in response to a customer complaint involving a small hole found in the film of the sterile barrier of the Injetak needle packaging (dis201). Further…