Search

Issue: On certain buses, the hoses between the fuel pump and remote fuel filter may be defective and could leak. Note: This recall only affects buses equipped with a Cummins 2021 model year L9 diesel engine. Safety Risk: A fuel leak can create…

Issue: On certain transit buses, the emergency exit windows could open suddenly in a crash. As a result, the emergency exit windows don't meet certain requirements of Canadian regulations. Safety Risk: An emergency exit window that opens suddenly…

Issue: On a small number of XE40 transit buses, a leak inside the energy storage system (ESS) enclosure could cause a short circuit. Note: This recall only affects buses equipped with a fiberglass energy storage system (ESS) enclosure. Safety…

Issue: On certain buses, the pinch bolt connecting the upper and lower steering column shafts may loosen. If this happens, you could lose steering control. Note: This recall only affects buses with a double tilt steering column. Safety Risk: A…

Issue: On certain buses, the steering gear may not have been assembled correctly. As a result, the steering gear could break and cause a loss of steering. Safety Risk: A loss of steering control could create the risk of a crash. Corrective…

Issue: On certain buses, the pressure switches on the hybrid drive system could fail. As a result, the bus could enter a reduced performance (limp) mode or there could be a loss of hybrid drive system power. Note: This is an expansion of Transport…

Issue: On a small number of buses, a programming problem could cause excess diesel exhaust fluid (DEF) to be injected into the exhaust after-treatment system. As a result, there could be a higher than normal amount of ammonia in the exhaust emissions…

Issue: On certain buses, the fuel rail assembly could develop a leak. Note: This recall only affects buses equipped with a Cummins L9 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: New Flyer…

Issue: On certain buses, an error in the inverter software may cause the electric drive system to shut down unexpectedly while driving. This could result in a loss of power to the wheels. Note: The bus may be restarted again once it is brought to a…

On certain buses, the connections from the front air brake hoses to the ABS modulator valves may not have been tightened to specification during assembly. If the connections were to separate, it would cause a loss of braking capability on the front axle…

On certain buses equipped with Kidde KDS-25 fire extinguishers, there may be a problem with the electric actuator on the fire extinguisher. This could cause the fire extinguisher not to discharge when it is activated. In the case of a fire, this could…

On certain buses, the pressure switches on the hybrid drive propulsion system could fail, causing it to a enter a reduced performance mode or disabling propulsion completely. A sudden failure of the propulsion system would result in a loss of motive…

On certain buses, the latching mechanism of the driver's seat belt buckle may prevent the tongue of the seat belt from being inserted into the latch assembly. If the seat belt is unable to be latched, and the vehicle is operated without the seat belt…

On certain buses, the sidewalls of the driveshaft's slip yoke were modified and may fracture and fatigue because they are too thin. This could result in failure of the driveshaft, which would cause loss of motive power while the vehicle is in motion, and…

On certain buses, there may be increased friction in the centre axle brake caliper guide pin due to a manufacturing defect. If undetected, this could cause the breakage of the guide pin bolt, irregular brake pad wear, and brake pad contact with the…