Search
Please note: using the search filters may not provide accurate search results for records prior to November 2021. When searching for older records, please ensure that you use the include archived checkbox.
Displaying 1 - 9 of 9 items.
On certain buses equipped with an S-Series wheelchair lift, the platform could potentially crack due to bent knuckle link arms and/or defective bearing. Overtime, the platform could separate of the rear portion of the pivot plate making the lift…
RecallAutomotive recall | 2023-09-15
On certain buses, the washers used to mount the seats to the floor of the bus may have been improperly heat treated, causing them to become brittle and potentially crack. If the washer is cracked and dislodges from the seat mounting area, the seat may…
RecallAutomotive recall | 2023-09-15
On certain buses, the washers used to mount the driver's seat belt assembly to the B-pillar may crack due a manufacturing error. If this occurs, a cracked washer could fall from the seat belt mounting area, causing the seat belt webbing to become loose,…
RecallAutomotive recall | 2023-09-15
On certain buses equipped with a Ricon S-Series or K-Series titanium wheelchair lift, the lift positioning input cam may fail. If this happens and the operator continues to press the "up" button, the platform could travel past the vehicle floor height,…
RecallAutomotive recall | 2023-09-15
Issue:
On certain buses, the outer handle for the roof hatch (emergency exit) could break. If this happens, it would be difficult to open the roof hatch from outside the bus.
Safety Risk:
An emergency exit that is difficult to open could increase…
RecallAutomotive recall | 2023-09-15
Issue:
On certain buses, a defect in the programmable relay power center (PRC) module could cause it to short circuit.
Note: This recall only affects PRC modules with a date code of 0919.
Safety Risk:
A short circuit can create the risk of a…
RecallAutomotive recall | 2022-02-04
On certain vehicles built on a Freightliner XBR chassis, a rubber-coated braided power steering hose may have inadequate clearance to the starter power stud due to incorrect routing. This could cause the power steering hose to rub against the stud on the…
RecallAutomotive recall | 2018-06-21
Certain buses equipped with certain instrument clusters may not comply with Canada Motor Vehicle Safety Standard (CMVSS) 101 - Controls and Displays and CMVSS 105 - Brake Systems. The ISO symbol for parking brake applied illuminates if there is a brake…
RecallAutomotive recall | 2018-01-08
Certain buses fail to conform to the requirements of CMVSS 217 – Bus Window Retention, Release and Emergency Exits. The sticker placement on the rear emergency window are not within 16cm of the release mechanisms, contrary to the requirements of the…
RecallAutomotive recall | 2016-05-12