Search

Lemur Group Inc. recalls PL Children's Sleepwear Starting date: February 28, 2018 Posting date: February 28, 2018 Type of communication: Consumer Product Recall…

On certain vehicles equipped with a trailer lighting control module, water may enter the module and connector, and could cause wiring corrosion and damage to the module. This could result in an electrical short to ground, which could cause an uncommanded…

On certain vehicles equipped with 8.8L liquid propane gas engines, the liquid propane delivery module (LPDM) relay for the propane booster pump and scavenge pump may experience intermittent continuity where the contacts in the relay may not make contact…

Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard CMVSS 207 - Anchorage of Seats, CMVSS 210 - Seat Belt Anchorages, CMVSS 210.1 - User-ready Tether Anchorages for Restraint Systems and Booster Seats, and CMVSS 210.2 - Lower…

On certain vehicles, the rear connection point from the side curtain air bags to the air bag inflators could disengage during deployment. If this occurs, the effectiveness of the side curtain air bags could be reduced, which would increase the risk of…

On certain vehicles with folding seats and a total permissible weight of under 4536 kg (10,000 lbs), the information label for body builders contains incorrect information regarding the unloaded vehicle weight (UVW). The purpose of the label is to…

On certain vehicles equipped with a V6 engine, one or both fuel delivery pipes may not have been properly connected to the fuel hoses during assembly. If the fuel delivery pipes are partially engaged, it could result in a fuel odour and/or a fuel leak,…

On certain motorcoaches, the anti-entrapment strip of the pneumatic outward swivelling entry door may not function after door actuation. As a result, a passenger could get pinched when the door is closing which could increase the risk of injury.…

On certain vehicles, incorrect front brake hoses may have been installed and could cause the hoses to contact adjacent components while the vehicle is being driven. This could result in premature wear to the hoses and potentially lead to a brake fluid…

On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were…

On certain motorcycles, contamination between the valve tappet and cam may cause the hardened surface of the valve tappet to peel if the surface shape of the valve tappet is convex. This would allow the inner part of the valve tappet to come in contact…

On certain motorcycles, electrical system performance could be affected by a weak connection at the crank case, corrosion at the ignition switch due to exposure to corrosive liquids, and/or improper routing causing wiring to wear against the fuel tank.…

On certain motorcycles, the fuel tank breather hose may have been kinked during assembly. This could result in fuel flow through the breather hose to be obstructed and the fuel tank internal pressure could become abnormally high or low, causing…

Certain vehicles may not comply with Canada Motor Vehicle Safety Standard (CMVSS) 101 – Location and Identification of Controls and Displays. Due to a software error, the instrument cluster may not turn on when the vehicle is started. This could disable…

On certain motorhomes built on RAM Promaster chassis, the modifications done to the exhaust system to accommodate the Continental Kit (CK) could cause the chassis wiring and bumper to extremely high temperatures. If anyone was to come in contact with the…