Search

GE Healthcare has become aware of two potential issues where inaccurate distance and area measurements can be displayed. Recall start date: May 5, 2022

Issue 1 - Indication of block movements function: When the operator activates the functions "block movements" or "block table movements" by pressing the block movements button on the pilot control module, there will be a dedicated message displayed on…

There is a possibility that a patient's final report sent out of Intelepacs contains the preliminary text instead of the final report text. This issue can manifest itself only: - In specific pacs-driven workflow configurations (e.g. multi-method…

Shift of FMRI overlay and no direct possibility to correct the alignment contribute to an incorrect surgery planning when not detected: - The original error is not generated in the software but a manual error during the scan. - Incorrect anterior/…

During the transmission of the patient table position information, sporadic interference signals may occur due to an error within the patient table position encoder. This problem can be detected by the system and can result in a scan abort. Sporadic…

This update package provides the update VB40B_HF06 for Syngo.Via systems running on version VB40A or VB40B. This update solves several issues and introduces several improvements. Recall start date: Apr 18, 2022

This update package provides the update VB30B for Syngo.Via systems running on version VB30A and any patch level. Recall start date: Apr 14, 2022

Following Shimadzu's investigation, it was noted that there is a potential issue with the system software that could cause: 1) The x-ray irradiation rate (pulse rate) of pulse fluoroscopy to be different then set value, 2) The beam hardening filter…

Siemens Healthcare will be distributing new operator's manuals to affected customers which are needed for the upcoming software upgrade to VF11. 5 cautions were added to the manual. Caution 1 (added two sentences to already existing caution): cause:…

The service pack (full version and delta package) NX VA20A-SP06 (VA20A-04T4) contains improvements concerning performance and stability. - Image reconstruction failure solved - Petra sequence image text corrected - New LW for RCCS_2G to support new…

There is a potential issue with Artis systems in Syngo application software version VE20. After CT image data from toshiba is loaded, unintended image mirroring can occur along the horizontal and vertical image axes. Recall start date: Mar 4, 2022

Potential for injury if the MR system is incorrectly deinstalled. Recall start date: Mar 10, 2022

Potential for injury if the Mr system is incorrectly deinstalled. Recall start date: Mar 10, 2022

Potential for injury if the MR system is incorrectly deinstalled. Recall start date: Mar 10, 2022

In rare cases, the SSD (source to skin or surface distance) calculation algorithm will miss the entry point of the ROI and instead calculate the distance to the exit point, resulting in an incorrect SSD. The SSD will be incorrect in UI, Dicom export,…