Search

On certain vehicles, the rearview mirror switch (mounted on the dashboard) may overheat, causing the plastic to melt. An overheated switch may not allow rearview mirror remote adjustability and, as such, the driver may not have full use of the mirrors…

On certain Diavel and Diavel Carbon motorcycles, the chain guard was manufactured with brass inserts that could deform over time. This could allow the license plate holder to loosen and interfere with the motorcycle's rear wheel, which could result in a…

On certain vehicles, a fuel line quick connector may have been incorrectly manufactured and could fail. Should the connector detach, it could cause engine stalling and a fuel leak. Engine stalling would result in lost propulsion which, in conjunction…

On certain trucks equipped with a Caterpillar C15 diesel engine, the Diesel Particulate Filter (DPF) combustion tube may fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the DPF…

Certain refrigerators used in Recreational Vehicles (RVs) contain either a sensing algorithm or a thermal switch to interrupt power when it detects high temperatures that could lead to a fire. An insufficient response time can result in the power not…

UNDECLARED MILK IN INDIGOSWEETS BRAND DARK CHOCOLATE SPONGE TOFFEE Starting date: June 23, 2011 Type of communication: Recall Alert sub-type: Allergy Alert Subcategory:…

On certain vehicles, the rear suspension springs may fracture and fail. This could allow the rear end of the spring to separate from the vehicle and strike another vehicle, stationary object, or bystander, causing property damage and/or personal injury…

On certain motorcycles, the fuel tank could develop cracks at the spot weld(s) on the side mount tabs, which could cause a fuel leak. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal…

On certain trucks, the driveshaft may not have been welded correctly during the manufacturing process. This could allow the driveshaft to fracture along the length of the tube seam weld when torque is applied. The fractured tube can twist or sever,…

On certain vehicles, the slack adjuster housings may have been manufactured incorrectly, which could allow the housings to fracture and fail. As a result, the wheel brake to which the slack adjuster is attached would no longer function, which could…

On certain travel trailers, the plug-in remote control receiver used to operate the Dimplex electric fireplace or electric stove may overheat. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Owners are…

On certain motorcycles, the center stand pivot screw may come loose during normal operation. If the screw backs out, the center stand may detach, presenting a ground clearance hazard, or coming into contact with the rear wheel and final drive assemblies…

On certain twin-steer 4900SA vehicles, the spacer used to connect the aft steer axle idler arm to the frame rail may develop cracks and eventually break under severe steering conditions. This would allow the idler arm to separate from the frame rail,…

On certain Sprinter 2500 vehicles, the bench-type seats (for rear occupants) may have been equipped with improperly manufactured ISOFIX anchorage brackets for child restraints. Failure of the child restraint anchorage to restrain the occupant as…

On certain vehicles, the automatic transmission's park rod guide retention pin may not have been properly installed. If the pin not installed properly, the park rod guide may become displaced, preventing the transmission park pawl from engaging when…