Search

Certain tires may not comply with Canadian Motor Vehicle Tire Safety Regulations. The tires may not be marked with a date code, contrary to the requirements of the regulations. This could cause tires to be difficult to identify in the event of a Notice…

Certain travel trailers may not comply with Canadian Motor Vehicle Safety Regulations. The certification label may not contain the correct type of vehicle. The label identifies the vehicle as a school bus instead of a travel trailer. Correction: The…

On certain motorhomes, the front facia wood trim could separate from the slide out. If this occurs, the slide out could come in contact with the driver or passenger which could cause a loss of vehicle control, increasing the risk of a crash causing…

Certain vehicles fail to conform to Canada Motor Vehicle Safety Standard 206 – Door Lock and Door Retention Components. These vehicles have a double locking feature that will not let the doors be opened by an occupant inside the vehicle unless the unlock…

Certain booster seats may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 213.2 - Booster Seats. Specifically, certain labels on the affected booster seats and certain sections in the instruction manual indicate a minimum…

On certain two-door coupe vehicles, in the event of a collision that warrants a deployment of the front passenger airbag, the deploying airbag could strike the passenger sun visor if it is in the down position. This could cause the sun visor to detach…

On certain vehicles, the fabric cover of the side curtain airbags may not have been pre-perforated correctly. This could prevent the airbag from deploying as intended. A side curtain airbag that does not deploy as intended during a crash (where side…

Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 210.2 - Lower Universal Anchorage Systems for Restraint Systems and Booster Cushions. The inboard child restraint fixture anchor on the left rear seat may have…

Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 135 - Brake Systems. If an ABS malfunction occurs during vehicle operation,the ABS warning lamp may fail to illuminate, contrary to the requirements of the…

Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standards (CMVSS) 210.1 - User-ready Tether Anchorages for Restraint Systems and (CMVSS) 209 – Seat Belt Assemblies. Front and rear seat belts may have been damaged…

Certain brush chipper and stump cutter units may not comply with the requirements of Canada Motor Vehicle Safety Standard 108 - Lighting System and Retro reflective Devices. During manufacturing, the side marker LED lights installed did not include a…

Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 108 - Lighting System and Retroreflective Devices. For vehicles built with the snow plow option, the necessary body controller programming for the snow…

Certain vehicles equipped with an automatic transmission and an ignition key may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 114 - Theft Protection and Rollaway Prevention. During assembly, in order to prevent automatic transmission…

Certain vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 212 - Windshield Mounting. The windshields of some vehicles may have been repaired using expired urethane primer. This may result in a windshield…

Certain school buses may not conform to Canada Motor Vehicle Safety Standard (CMVSS) 131 - School Bus Pedestrian Safety Devices. The STOP decal may not adhere properly to the stop sign and could peel off without warning, which could cause it to fail to…