Health professional risk communication

Sodium Acetate Injection, USP - Potential for the Presence of Particulate Matter

Last updated

Summary

Product
Sodium Acetate Injection, USP
Issue
Health products - Product quality
Health products - Product safety
What to do

See Key Messages below

Audience
Health professionals

Affected products

Product Product Code Package Size Market Authorization Holder DIN Lot/ Expiry Date
Sodium Acetate Injection, USP, 328 mg/mL C32B1 100 mL vial Fresenius Kabi Canada Ltd. 02139529 6126554/ 2023DE

Issue

UPDATED INFORMATION – May 6, 2022
Further to the communication below, issued on March 15, 2022, regarding the potential for the presence of particulate matter in vials of Sodium Acetate Injection, USP (DIN 02139529) from lot 6126554, Fresenius Kabi Canada Ltd., in consultation with Health Canada, is providing updated information on the filters to be used with distributed vials from this affected lot.

Healthcare professionals are reminded to carefully inspect all sodium acetate injectable products, regardless of the lot, before and after dilution and all intravenous bags. If particulate matter is observed, the product should NOT be administered.

Healthcare professionals are advised, when using the affected lot of Sodium Acetate Injection, USP, to follow this updated information:

  • For non-Total Parenteral Nutrition (TPN) therapies, use a 5 micron nylon filter needle to withdraw the required calculated volume of sodium acetate from the vial. When administering the final admixture to patients, use the most suitable filter among the following:
    • A 0.22 micron or 1.2 micron polyethylenesulfone (PES) in-line filter, OR
    • A 0.22 micron or 1.2 micron nylon in-line filter, OR
    • A 0.45 micron or 1.2 micron acrylic copolymer in-line filter. 
  • For 2-in-1 (amino acids and carbohydrates) TPN therapies, use a 5 micron nylon filter needle to withdraw the required calculated volume of sodium acetate from the vial, then use a TPN-compatible 0.22 micron in-line filter to administer the final admixture.
  • For 3-in-1 (lipid, amino acids, and carbohydrates) TPN therapies, use a 5 micron nylon filter needle to withdraw the required calculated volume of sodium acetate from the vial, then use a TPN-compatible 1.2 micron in-line filter to administer the final admixture.

 

 

March 15, 2022

Fresenius Kabi Canada Ltd. has identified visible particulate matter in certain vials of Sodium Acetate Injection, USP from lot 6126554 during routine retention sample testing.

The distributed vials from the affected lot are not being recalled due to shortages of this product.

Particulate matter (greater than 5 microns) could potentially obstruct blood flow through capillaries.

In the event that particulate matter is inadvertently injected into a patient, there is potential for patient injury, such as local inflammation, phlebitis, abscesses, granulomas in visceral organs, allergic response, infections at the injection site and/or embolization in the body.

There have been no reports of adverse events to date for the affected lot.

 

Audience

Healthcare professionals including physicians, nurses, hospital pharmacists, and other personnel involved in the administration, handling, and distribution of Sodium Acetate Injection, USP.

 

Key Messages

  • Vials of Sodium Acetate Injection, USP by Fresenius Kabi Canada Ltd. (DIN 02139529) from lot 6126554 may contain particulate matter.
  • In the event that particulate matter is inadvertently injected into a patient, there is potential for patient injury, such as local inflammation, phlebitis, abscesses, granulomas in visceral organs, allergic response, infections at the injection site and/or embolization in the body.
  • Healthcare professionals are advised to:
    • Consider clinical alternatives to sodium acetate for patients when possible due to shortages of this product.
    • Carefully inspect all sodium acetate injectable products before and after dilution, regardless of the lot. If particulate matter is observed, the product should NOT be administered.
    • When using the affected lot of Sodium Acetate Injection, USP for non-Total Parenteral Nutrition (TPN) therapies, use a 5 micron filter needle to withdraw the required calculated volume and use a 0.22 micron in-line filter when administering the final intravenous admixture to patients.
    • When using the affected lot of Sodium Acetate Injection, USP for 2-in-1 (amino acids and carbohydrates) TPN therapies, use a 5 micron filter needle to withdraw the required calculated volume of sodium acetate then use a 0.22 micron in-line filter for the final admixture.
    • ONLY for the administration of 3-in-1 (lipid, amino acids, and carbohydrates) TPN therapies, when using the affected lot of Sodium Acetate Injection, USP, use a 5 micron filter needle to withdraw the required calculated volume of sodium acetate then use a 1.2 micron in-line filter for the final admixture.

 

Background Information

Sodium Acetate Injection, USP is indicated as a source of sodium, for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.

Sodium Acetate Injection, USP, 328 mg/mL, 100 mL vial from lot 6125334 and Sodium Acetate Injection, USP, 328 mg/mL, 50 mL vial from lot 6125335 were previously recalled due to the presence of particulate matter in the vials. Healthcare professionals are reminded that product from these two lots should not be used.

Fresenius Kabi Canada Ltd. has initiated investigations to determine the root cause and any corrective and preventive actions.

 

Information for healthcare professionals

Healthcare professionals are advised to:

  • Carefully inspect all sodium acetate injectable products before and after dilution, regardless of the lot. If particulate matter is observed, the product should NOT be administered.
  • Due to shortage concerns of this product, consider clinical alternatives to sodium acetate for patients when possible and conserve product only for medically necessary use.
  • When using the affected lot of Sodium Acetate Injection, USP for non-Total Parenteral Nutrition (TPN) therapies, use a 5 micron filter needle to withdraw the required calculated volume and use a 0.22 micron in-line filter when administering the final intravenous admixture to patients.
  • When using the affected lot of Sodium Acetate Injection, USP for 2-in-1 (amino acids and carbohydrates) TPN therapies, use a 5 micron filter needle to withdraw the required calculated volume of sodium acetate then use a 0.22 micron in-line filter for the final admixture.
  • ONLY for the administration of 3-in-1 (lipid, amino acids, and carbohydrates) TPN therapies, when using the affected lot of Sodium Acetate Injection, USP, use a 5 micron filter needle to withdraw the required calculated volume of sodium acetate then use a 1.2 micron in-line filter for the final admixture.

 

Action taken by Health Canada

Health Canada is communicating this important safety information to healthcare professionals and Canadians via the Recalls and Safety Alerts Database on the Healthy Canadians Web Site. This communication will be further distributed through the MedEffect™ e-Notice email notification system.

Health Canada has directed Fresenius Kabi Canada Ltd., the market authorization holder for Sodium Acetate Injection, USP, 328 mg/mL, 100 mL vial, to ensure that they inform all impacted healthcare professionals and other personnel involved in administering, handling, or distributing this product. 

Health Canada is monitoring the company’s implementation of any necessary corrective and preventative actions. If additional safety information is identified, Health Canada will take appropriate action and inform Canadians as needed.

 

Report health or safety concerns

Health Canada’s ability to monitor the safety of marketed health products depends on healthcare professionals and consumers reporting adverse reactions and medical device incidents. Any case of serious or unexpected adverse reaction in patients receiving Sodium Acetate Injection, USP should be reported to Fresenius Kabi Canada Ltd. or Health Canada.

 

Fresenius Kabi Canada Ltd.

165 Galaxy Boulevard, Suite 100

Toronto, ON M9W 0C8

Telephone: 905-770-3711

Fax: 1-844-605-4465

Email: Canada_vigilance@fresenius-kabi.com

 

You can report any suspected adverse reactions associated with the use of health products to Health Canada by:

  • Calling toll-free at 1-866-234-2345; or
  • Visiting MedEffect Canada's Web page on Adverse Reaction Reporting for information on how to report online, by mail or by fax.

 

For other health product inquiries related to this communication, contact Health Canada at:

Health Product Compliance Directorate, Regulatory Operations and Enforcement Branch

E-mail: hpce-cpsal@hc-sc.gc.ca

Telephone: 1-800-267-9675

 

 

Original signed by

Dara Man,

National Safety Officer, Vigilance

Fresenius Kabi Canada Ltd.

 

 

Images

Sodium Acetate Injection, USP, 328 mg/mL, 100 mL vial by Fresenius Kabi Canada Ltd.

 

Image of Sodium Acetate Injection, USP

Additional information

Details
Original published date:
Alert / recall type
Health professional risk communication
Category
Health products - Drugs
Companies
Published by
Health Canada
Audience
Health professionals
Identification number
RA-64001